on a stock map sensor,the amount of boost you can run is limited due to the fact that it doesn't know what to do with it, and throws a code.
OBD0 .65 KG/cm2= 9.24 PSI
OBD1-2 .75 kg/cm2 = 10.66 PSI
if you want more than that, you need to run a GM 3-bar map sensor (common) or others like the gm 2.5bar, the aem 3.5, and there are other crazy ones out there that are like 5 or 6 bar.
Remember, your tuning software must have the proper voltage assigned to the sensor. Both stock and the 6 bar maps operate on a fixed voltage range (0-5volts), but each psi moves a different amount of voltage over. Therefore it is imperitive to be using the right map sensor's output voltage range when you're tuning, and thus in your software.
A linear example (not accurate numbers, just for display purposes)
Code:
0------------------------------------5v
0----1----3-----5------7------9-----11 psi (oem)
0-1--3--5--7--9---13--15--19---21---27 psi (gm 3bar)
0-5--10--18--23--27--32--38--41--48-56 psi (5bar)
keep in mind, 1 bar is alread used by the atmospheric pressure, so it leaves you about 2 bars give or take your elevation left for boost... about 26-28 psi (depending on elevation) on a GM 3-bar
Traduccion
en un MAP Sensor, la cantidad de flujo de aire es limitado debido al hecho de que no sabe qué hacer con él, y lanza un código.
OBD0 .65 kg/cm2 = 9,24 PSI
OBD1-2 .75 kg/cm2 = 10,66 PSI
si desea más que eso, es necesario ejecutar un GM 3-bar MAP (común) o de otros como el GM 2.5 bar, AEM la 3.5 bar, y hay otros más locos por ahí que son como 5 o 6 bar.
Recuerde, su programa de ajuste debe tener la adecuada tensión asignada al sensor. Ambas acciones y el 6 bar mapas operar en un rango de voltaje (0-5volts), pero cada psi mueve una cantidad diferente de la tensión más. Por lo tanto, es imperitive a usar el derecho mapa de salida del sensor de tensión cuando estás afinación, y por lo tanto en su software.
Un ejemplo lineal (no precisa el número, sólo para fines de visualización)
Código:
0 ------------------------------------ 5v
0 ---- 1 ---- 3 ----- 5 ------ 7 ------ 9 ----- 11 psi (OEM)
0-1 - 3 - 5 - 7 - 9 --- 13 - 15 - 19 --- 21 --- 27 psi (gm 3bar)
0-5 - 10 - 18 - 23 - 27 - 32 - 38 - 41 - 48-56 psi (5bar)
tener en cuenta, 1 bar es la presión atmosférica, por lo que le deja cerca de 2bar de dar o tomar su elevación... sobre 26 -28 psi (dependiendo de la altitud) en una barra de GM 3
OBD0 .65 KG/cm2= 9.24 PSI
OBD1-2 .75 kg/cm2 = 10.66 PSI
if you want more than that, you need to run a GM 3-bar map sensor (common) or others like the gm 2.5bar, the aem 3.5, and there are other crazy ones out there that are like 5 or 6 bar.
Remember, your tuning software must have the proper voltage assigned to the sensor. Both stock and the 6 bar maps operate on a fixed voltage range (0-5volts), but each psi moves a different amount of voltage over. Therefore it is imperitive to be using the right map sensor's output voltage range when you're tuning, and thus in your software.
A linear example (not accurate numbers, just for display purposes)
Code:
0------------------------------------5v
0----1----3-----5------7------9-----11 psi (oem)
0-1--3--5--7--9---13--15--19---21---27 psi (gm 3bar)
0-5--10--18--23--27--32--38--41--48-56 psi (5bar)
keep in mind, 1 bar is alread used by the atmospheric pressure, so it leaves you about 2 bars give or take your elevation left for boost... about 26-28 psi (depending on elevation) on a GM 3-bar
Traduccion
en un MAP Sensor, la cantidad de flujo de aire es limitado debido al hecho de que no sabe qué hacer con él, y lanza un código.
OBD0 .65 kg/cm2 = 9,24 PSI
OBD1-2 .75 kg/cm2 = 10,66 PSI
si desea más que eso, es necesario ejecutar un GM 3-bar MAP (común) o de otros como el GM 2.5 bar, AEM la 3.5 bar, y hay otros más locos por ahí que son como 5 o 6 bar.
Recuerde, su programa de ajuste debe tener la adecuada tensión asignada al sensor. Ambas acciones y el 6 bar mapas operar en un rango de voltaje (0-5volts), pero cada psi mueve una cantidad diferente de la tensión más. Por lo tanto, es imperitive a usar el derecho mapa de salida del sensor de tensión cuando estás afinación, y por lo tanto en su software.
Un ejemplo lineal (no precisa el número, sólo para fines de visualización)
Código:
0 ------------------------------------ 5v
0 ---- 1 ---- 3 ----- 5 ------ 7 ------ 9 ----- 11 psi (OEM)
0-1 - 3 - 5 - 7 - 9 --- 13 - 15 - 19 --- 21 --- 27 psi (gm 3bar)
0-5 - 10 - 18 - 23 - 27 - 32 - 38 - 41 - 48-56 psi (5bar)
tener en cuenta, 1 bar es la presión atmosférica, por lo que le deja cerca de 2bar de dar o tomar su elevación... sobre 26 -28 psi (dependiendo de la altitud) en una barra de GM 3