Te dejo la nformacion!
Head Bolts
Tighten the cylinder head bolts sequentially in 3 steps.
1st step torque: 20 Nm (2.0 kgf/m, 14 lbf/ft)
2nd step torque: 49 Nm (5.0 kgf/m, 36 lbf/ft)
3rd step torque: 67 Nm (6.8 kgf/m, 49 lbf/ft)
Rocker Arm Assembly and Cam Holder
Tighten each bolt 2 turns at a time, in the sequence shown below to ensure that the rockers do not bind on the valves.
Specified torque:
8 mm bolts: 20 Nm (2.0 kgf/m, 14 lbf/ft)
Apply engine oil to the bolt threads.
6 mm bolts: 12 Nm (1.2 kgf/m, 8.7 lbf/ft)
Apply engine oil to the bolt threads.
6 mm bolts: (11), (12), (13), (14)